2025 Grasshopper Stand-On Series SO37 61"

Information

2025 Grasshopper Stand-On Series SO37 61"

Take your business to the next level. The Stand-On Series is designed for extreme operator proficiency and all-day ergonomic comfort. True ZeroTurn™ maneuverability, outstanding ease-of-use, effortless on/off and legendary Grasshopper cut quality combine to deliver superior performance.

Fleet managers will appreciate the commonality of parts between Stand-On models and the rest of the Grasshopper product line.

Photos

Highlights

  • Linden, Alberta
  • 2025
  • Grasshopper
  • Stand-On Series SO37 61"
  • Model: Vanguard V-Twin EFI/ETC
  • T-DriveTM hydrostatic transmission with tandem 12cc Parker pumps-in-reservoir, in-line CoolFanTM for cooling efficiency, and design-matched Parker high-torque wheel motors | Filtration/Hydro: Self-contained fluid and internal filtration / CoolTemp Hydro-MaxTM fluid withstands high and low temperature extremes for extended service intervals
  • Gasoline - unleaded
  • Available
  • Deck Side Discharge: 74.5 in. (189.2 cm) | Deck Mulch: 62.5 in. (158.8 cm)
  • Cutting Range: 1.0 - 5.5 in. (2.5 - 12.7 cm) in 1/4-inch increments

Specifications

  • 2025
  • Grasshopper
  • Stand-On Series
  • SO37 61"
  • Stand-On
  • Model: Vanguard V-Twin EFI/ETC
  • B&S
  • 60.6 cu. in. (993cc)
  • Pressure Lube/Filter
  • System: Air
  • Heavy-duty, cyclonic, remote-mounted engine dual cleaner with replaceable element
  • Solenoid shift
  • Breakerless
  • Gasoline - unleaded
  • T-DriveTM hydrostatic transmission with tandem 12cc Parker pumps-in-reservoir, in-line CoolFanTM for cooling efficiency, and design-matched Parker high-torque wheel motors | Filtration/Hydro: Self-contained fluid and internal filtration / CoolTemp Hydro-MaxTM fluid withstands high and low temperature extremes for extended service intervals
  • One- or two-handed operation with dual levers that automatically return to neutral from either forward or reverse position
  • Coil spring suspension with dampening
  • Dynamic braking through hydrostatic transmission
  • Manual lever through linkage to bar in tire (compression) brake
  • Drive: 26 x 12-12 Mag OTR, 4-ply rated
  • Maintenance-free: 12 Volt
  • Forward: 0 - 10.5 mph (16.9 kph) | Reverse: 0 - 6.0 mph (9.7 kph)
  • Ultra quiet, single, industrial type
  • Standard - LED
  • Blades: (3) 21 in. (53.3 cm)
  • Cutting Range: 1.0 - 5.5 in. (2.5 - 12.7 cm) in 1/4-inch increments
  • 8-in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern
  • Midmount w/ DuraMax® Deck - Mowing Position: 77.0 in. (185.6 cm)
  • Deck Side Discharge: 74.5 in. (189.2 cm) | Deck Mulch: 62.5 in. (158.8 cm)
  • 13.5 U.S. Gal. (51.1 l) total fuel capacity twin tanks with fuel selector
  • Uncrated: 1250 lbs. (567.0 kg) | Mulching Package: 36 lbs (16.3 kg)
  • Crankshaft: Vertical | Blade Drive: Belt drive with single Kevlar V-belt & idler arm tensioning | Interlock System: Prevents engine start when PTO clutch is engaged or steering levers are in drive position; allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are returned to neutral | Console-mounted Instruments: Low engine oil pressure, hour meter, phone/accessory tray with USB charging ports, parking brake indicator light, ignition switch, choke & push/pull PTO switch | Turning Radius: True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point. | Turning Radius: True zero degree, turns within own length with counter-rotating, independently powered drive wheels
  • Double-layered, 10-gauge plus 7-gauge formed-steel laminate spindle plane 0.313 in. (7.95 mm) thick ? more than 25% thicker than 0.25 in. (6.35 mm) ? with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in. (22.86 mm) thick in stress zones; anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck.
  • Assemblies: Sentry™ Spindle System, 2.5 cm (approx. 1 in.) outside diameter (O.D.) shaft; double bearings, greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.